Farm update

Things are looking pretty good, getting very close to start harvesting Lettuce and Arugura. I think I will shart harvesting the older bigger leaves and leave the plant to produce more before I replace i with a brand new seedling.
Here's a 14day time-lapse video and few pics.

Update, time-lapse video

Just a quick update, things got a little out of control when I decided to replace the 2 part nutrient I was using with what I thought to be a 1 part nutrient, FloraGro. Big mistake, several plants started to turn yellow and further investigation was pointing to lack of nitrogen.
Then found the FloraGro is a 3 part nutrient which required two other parts, FloraMicro and FloraBloom to provide correct nutrients N-P-K as well as micro nutrients like Calcium, Magnesium, Iron and several others.
I think the issue was reverted in time and plants seems to be moving on from this scary event, here's a 10 day time lapse, one photo/day.

Follow up on new system

Here's a follow up on my system. Most plants are doing pretty well, specially arugula. Roots on these reach over 8in and are growing fast. Lettuce now started to take of as well. I think things will move exponentially from now on. I have several seedlings waiting in line, arugula, lettuce and spinach. I also purchased new seeds for these from a different source to see if will make any improvement to next cycle.
I now lowered the lights to 21in over the plants, 100% power.

Here are few pics:

Added a small fan to circulate air in the system

Added this modified water cooler with a temperature controller to cool the nutrient solution. I was getting over 75F and now it stays under 72F.

Here's the reservoir showing the large black pipe for the system and the smaller vinyl tubing which circulates through the cooler

Arugula

Lettuce

Spinach

Watercress

First seedlings into the NFT system

I'm waiting the plants to develop roots before transfer to the NFT system but decided to do a test with one lettuce and one basil seedling as to see if it would grow faster than what was left in the nursery box. Activated only one channel of the NFT system and have these with around 500ppm, water temp is about 70F, HPS light at 50% about 3ft high. I also added two sets of green onions from the grocery store. These are hydroponic grown and had a nice amount of roots still attached.

First post, starting hydroponic for vegetables

Just getting starting on my new challenge, growing vegetable indoors with hydroponic technique.
From the different methods of hydroponics I have seen online, the NFT (Nutrient Film Technique) seems the most interesting to me, not sure why, but decided to start with this one and see what happens.
Got the following equipment so far:
-4x4ft NFT hydroponic tray system, built from vinyl water downspout. This system comprises of 6 4ft long trays with 7 holes each, totaling 42 growing spots.
-Water pump, aquarium air pump and stone, 32 gal reservoir and distribution hoses.
-600W MH/HPS light system with ballast, socket, reflector,  and timer from Apollo. Got this from Amazon, link here for lest than $140
-Kit for starting seeds with media, trays and canopy
-Liquinox Start, Vitamin B1 Transplant solution for improving root development
-BluMoon two parts hydroponic nutrient solution (1-0-0 + 0-1-3).

-Reflecting film to confine light within a 4x4x4ft space

I have started the seeds of Lettuce, Spinach, Basil, Arugula and Watercress and I'm amazed how fast some of these take off.
Lettuce and Arugula takes usually a day or two to sprout. Spinach is the slowest with few plant after 2 weeks and Watercress and Basil in between.
I'm right now waiting the plants to develop enough roots to move it to the NFT system, here's how my setup is looking so far.